Camera Free movement issue

Post Reply
Dizzy_slith
Administrative Corporal - SdKfz 251/1
Administrative Corporal - SdKfz  251/1
Posts: 139
Joined: Thu Jan 19, 2017 9:20 pm

Camera Free movement issue

Post by Dizzy_slith » Thu Jan 26, 2017 6:40 am

I've noticed on some maps that when the camera nears the edge of the map zone where the red line is, the camera is prevented from moving closer toward the red line. Its as if there is an invisible wall. This invisible block prevents camera movement that makes it frustrating to obtain the type of angle needed for movement of units and or screenshots.

Can you just completely unrestrict the camera? Why is there a need for an invisible barrier to prevent camera movement? Its not like the camera will fall off the edge if it gets there. Will it? :shock:

zakblood
Most Active User 2017
Most Active User 2017
Posts: 15637
Joined: Thu Jun 12, 2014 6:44 pm

Re: Camera Free movement issue

Post by zakblood » Thu Jan 26, 2017 7:30 am

taking the camera down only 1 part from max zoom out gives full access to the maps, on max zoom out, it does seem to limit edge scrolling and corners also

Dizzy_slith
Administrative Corporal - SdKfz 251/1
Administrative Corporal - SdKfz  251/1
Posts: 139
Joined: Thu Jan 19, 2017 9:20 pm

Re: Camera Free movement issue

Post by Dizzy_slith » Thu Jan 26, 2017 8:59 am

ty.

Post Reply

Return to “Sanctus Reach After Action Reports (AAR)”