Page 1 of 1

What kind of glue to I have to use?

Posted: Tue Apr 23, 2019 12:33 pm
by Quke
Ok, I am stumped, I just tried gluing together these figures, waited until the morning and they just pop apart easily. When I used to wargame, I used superglue and pinning but I stopped wargaming years ago and now just do model kits and other hobby stuff. normally this liquid cement I have can fuse anything, scale model kits, pvc figures etc. However, these figures, the plastic refuses to fuse and even with 5 hours curing time my liquid cement is not enough. So before I coat these guys in layers of plastic cement, what the heck should I be using https://yourdiorama.com/glue-for-plasti ... s-reviews/ , please don't say epoxy.
this is my brand of liquid cement
any help would be great

Re: What kind of glue to I have to use?

Posted: Tue Apr 23, 2019 4:02 pm
by pyruse
It might help if you told us what make of figures you are talking about, and what they are made from

Re: What kind of glue to I have to use?

Posted: Wed May 20, 2020 4:33 pm
by madaxeman
Looks like the OP has posted in order to provide us all with a link to an affiliate site, in which the website owner will gets a small kickback from Amazon if you buy anything after clicking these links.

Affiliate marketing websites (in the UK at least) are now required by law to make it reasonably clear that the links are affilate links and that there is a commercial benefit to the website owner should you buy after clicking them.... I did this retrospectively across all of the affiliate links on Madaxeman.com a while back, but can see no such information on this site!

Re: What kind of glue to I have to use?

Posted: Thu May 21, 2020 2:10 pm
by philqw78
The post is over a year old tho Tim, you brought it back from the dead

Re: What kind of glue to I have to use?

Posted: Thu May 21, 2020 11:07 pm
by madaxeman
Always glad to be of service - it flagged itself as the most recent post in this section of the forum, and I missed the year but saw the months and date ....🤪