Bug Reports
Moderator: Panzer Corps 2 Moderators
-
- Field Marshal - Elefant
- Posts: 5865
- Joined: Mon Aug 15, 2011 12:48 pm
- Location: the land of freedom
Re: Bug Reports
Kharkov 42 (Base game), reward bug
At first I captured the airport near Lozovya) with a German unit and got the reward (Liberator option). Then in a second stage, a Russian unit took over the airport. To finish, and that’s where the bug is, I recaptured the airport with a Romanian unit and I received a second time the reward :
At first I captured the airport near Lozovya) with a German unit and got the reward (Liberator option). Then in a second stage, a Russian unit took over the airport. To finish, and that’s where the bug is, I recaptured the airport with a Romanian unit and I received a second time the reward :
-
- Field Marshal - Elefant
- Posts: 5865
- Joined: Mon Aug 15, 2011 12:48 pm
- Location: the land of freedom
Re: Bug Reports
Warsaw (Base game), AI plane bug:
Why is this Polish plane going to a German airbase
Why is this Polish plane going to a German airbase
-
- Private First Class - Wehrmacht Inf
- Posts: 6
- Joined: Thu Apr 08, 2021 8:49 am
Re: Bug Reports
Hello to everyone!
I have some minor issues with icons and a few suggestion.
First - issue - problem with showing too many icons (overrun,double attack etc) - they're shown outside the unit information area
Second - heroes - when you put 4 heroes in unit then on heroes information area the last one stats are shown outside (they stick out of the box)
Suggestions
- when unit receives a medal, you put the hero in this unit it would be nice to see that stats inside unit stats screen reflects that. For example if my Verdeja 2 has zero slots and + 3 hard medal i'd like to see it in statistic rather than manually add it to base tank stats
I have some minor issues with icons and a few suggestion.
First - issue - problem with showing too many icons (overrun,double attack etc) - they're shown outside the unit information area
Second - heroes - when you put 4 heroes in unit then on heroes information area the last one stats are shown outside (they stick out of the box)
Suggestions
- when unit receives a medal, you put the hero in this unit it would be nice to see that stats inside unit stats screen reflects that. For example if my Verdeja 2 has zero slots and + 3 hard medal i'd like to see it in statistic rather than manually add it to base tank stats
Re: Bug Reports
Possible bug with Meticulous Planning, or rather a situation where it possibly works slightly different than intended. I was testing out things for a possible AO run and found out that this allows to use a second move action to unmount from organic transport beyond the auto-unmount range. That's of course fine, however if this is done, it then still allows the unit to fire. AA guns will switch back to default AA mode, but other than that it is almost as powerful as Aggressive Deployment. Almost, since beyond the AA gun limitation, if the towed unit moves within the auto-unmount range of its transport it will then not be able to fire.
-
- Field Marshal - Elefant
- Posts: 5865
- Joined: Mon Aug 15, 2011 12:48 pm
- Location: the land of freedom
Re: Bug Reports
FIRST AID Bug
I don’t think this is a real bug, I just think the description is incomplete. The description says that "Restores one point of strength every turn the unit did not attack" but if the unit does not attack but just moves then the First Aid does not apply.
Maybe the description should be rather "Restores one point of strength every turn the unit did not attack or move" ?
I don’t think this is a real bug, I just think the description is incomplete. The description says that "Restores one point of strength every turn the unit did not attack" but if the unit does not attack but just moves then the First Aid does not apply.
Maybe the description should be rather "Restores one point of strength every turn the unit did not attack or move" ?
-
- Sergeant - Panzer IIC
- Posts: 186
- Joined: Thu May 09, 2013 3:57 pm
Re: Bug Reports
Mhm, looking at that picture, the unit doesn't have its attack action anymore.terminator wrote: ↑Tue May 25, 2021 4:55 am FIRST AID Bug
I don’t think this is a real bug, I just think the description is incomplete. The description says that "Restores one point of strength every turn the unit did not attack" but if the unit does not attack but just moves then the First Aid does not apply.
Maybe the description should be rather "Restores one point of strength every turn the unit did not attack or move" ?
Capture d’écran (18).jpg
Are you per chance playing with the negative modifier that randomly takes away the attack-action of a unit?
Because that seems to me to be a more likely option as a cause for this than movement having anything to do with it. Not saying that this couldn't be a bug, but I do think I have seen infantry move and heal regardless of that quite a few times. Then again, I misremembered artillery doing counter battery fire against artillery it couldn't see, so my memory might not be the best judge for that
-
- Field Marshal - Elefant
- Posts: 5865
- Joined: Mon Aug 15, 2011 12:48 pm
- Location: the land of freedom
Re: Bug Reports
This heavy infantry unit did not attack but can no longer attack as it moved too far.George_Parr wrote: ↑Tue May 25, 2021 9:02 pmMhm, looking at that picture, the unit doesn't have its attack action anymore.terminator wrote: ↑Tue May 25, 2021 4:55 am FIRST AID Bug
I don’t think this is a real bug, I just think the description is incomplete. The description says that "Restores one point of strength every turn the unit did not attack" but if the unit does not attack but just moves then the First Aid does not apply.
Maybe the description should be rather "Restores one point of strength every turn the unit did not attack or move" ?
Capture d’écran (18).jpg
Are you per chance playing with the negative modifier that randomly takes away the attack-action of a unit?
Because that seems to me to be a more likely option as a cause for this than movement having anything to do with it. Not saying that this couldn't be a bug, but I do think I have seen infantry move and heal regardless of that quite a few times. Then again, I misremembered artillery doing counter battery fire against artillery it couldn't see, so my memory might not be the best judge for that
Re: Bug Reports
I have built a scenario in which a second allied nation should move the troops via AI control. Since the last patch, the "Move to ..." command assigned in the editor no longer works.
-
- Field Marshal - Elefant
- Posts: 5865
- Joined: Mon Aug 15, 2011 12:48 pm
- Location: the land of freedom
Re: Bug Reports
Capture victory hexes bug
At the beginning of each turn, the counter goes off and then when we catch a flag everything gets better:
At the beginning of each turn, the counter goes off and then when we catch a flag everything gets better:
Re: Bug Reports
This is happening to me too after installing the 1.1.23 patch. It fixed the crashing problem but caused this bug .terminator wrote: ↑Fri Jun 11, 2021 6:53 pm Capture victory hexes bug
At the beginning of each turn, the counter goes off and then when we catch a flag everything gets better:
Capture d’écran (55).jpg
Capture d’écran (56).jpg
-
- Field Marshal - Elefant
- Posts: 5865
- Joined: Mon Aug 15, 2011 12:48 pm
- Location: the land of freedom
Re: Bug Reports
This bug was already present with version 1.1.22 and persists with version 1.1.23.tpoo wrote: ↑Sat Jun 12, 2021 10:20 pmThis is happening to me too after installing the 1.1.23 patch. It fixed the crashing problem but caused this bug .terminator wrote: ↑Fri Jun 11, 2021 6:53 pm Capture victory hexes bug
At the beginning of each turn, the counter goes off and then when we catch a flag everything gets better:
Example in another scenario :
-
- Administrative Corporal - SdKfz 251/1
- Posts: 127
- Joined: Sat Dec 12, 2020 1:14 pm
Re: Bug Reports
Royal Yugoslav Army insignia (cross) is twisted up with Yugoslav People's Army insignia (star) and vice versa. They should be switched. Their flags and camos, however, are still correct.
-
- Slitherine
- Posts: 1154
- Joined: Thu Sep 04, 2014 2:49 pm
- Location: A small island in the Outer Hebrides.
Re: Bug Reports
Thanks. Thats fixed and should be in the next update.Khancotlette wrote: ↑Mon Jun 14, 2021 11:37 am Royal Yugoslav Army insignia (cross) is twisted up with Yugoslav People's Army insignia (star) and vice versa. They should be switched. Their flags and camos, however, are still correct.
Pat
............................
Pat a Pixel Pusher
............................
Pat a Pixel Pusher
............................
-
- Slitherine
- Posts: 1154
- Joined: Thu Sep 04, 2014 2:49 pm
- Location: A small island in the Outer Hebrides.
Re: Bug Reports
This has been fixed.asuser wrote: ↑Wed Mar 24, 2021 4:57 pm Missing ribbon marking for hero unit
Hello!
With the LUA script function it is possible to assign a hero to units. It works for most nations correctly. This is then visible on the unit plate of the corresponding unit with a small ribbon.
I'm currently working on a scenario for Vichy France. There it does not seem to work with hero assignment and the identification of the hero unit with the ribbon.
Vichy France troops are marked with "VF" in the editor. When looking in the main directory ... / Content / GUI / UnitPlates / Ribbons I noticed that there is no file with the ending "vf".
Could it be because of that and how can I help myself here?
See here, please, the missing sign at the hero unit plate (white/empty):
PC2_Ribbon_test.png
Pat
............................
Pat a Pixel Pusher
............................
Pat a Pixel Pusher
............................
Re: Bug Reports
Hello,
I noticed a red inscription on the screen while landing in North America. It is in the upper left corner and says:
SCRIPT ERROR Condition check function `Reveal Condition`not found.
It dissapeared after a while and I didn`t notice anything unnormal in my gameplay (except that they shot my Me410a down).
Is this something serious? It keeps on appearing from time to time. I did never notice such a thing before.
Thanks and Bye.
I noticed a red inscription on the screen while landing in North America. It is in the upper left corner and says:
SCRIPT ERROR Condition check function `Reveal Condition`not found.
It dissapeared after a while and I didn`t notice anything unnormal in my gameplay (except that they shot my Me410a down).
Is this something serious? It keeps on appearing from time to time. I did never notice such a thing before.
Thanks and Bye.
Re: Bug Reports
Patrick Ward wrote: ↑Mon Jun 14, 2021 9:25 pmThis has been fixed.asuser wrote: ↑Wed Mar 24, 2021 4:57 pm Missing ribbon marking for hero unit
Hello!
With the LUA script function it is possible to assign a hero to units. It works for most nations correctly. This is then visible on the unit plate of the corresponding unit with a small ribbon.
I'm currently working on a scenario for Vichy France. There it does not seem to work with hero assignment and the identification of the hero unit with the ribbon.
Vichy France troops are marked with "VF" in the editor. When looking in the main directory ... / Content / GUI / UnitPlates / Ribbons I noticed that there is no file with the ending "vf".
Could it be because of that and how can I help myself here?
See here, please, the missing sign at the hero unit plate (white/empty):
PC2_Ribbon_test.png
Pat
Thank you for the information. I tested it, unfortunately it still doesn't work. Can you show a test picture how it looks now, please?
Or will it work with the next patch around 9th of July?
-
- Slitherine
- Posts: 1154
- Joined: Thu Sep 04, 2014 2:49 pm
- Location: A small island in the Outer Hebrides.
Re: Bug Reports
I presume with the next update.asuser wrote: ↑Fri Jun 18, 2021 4:47 amPatrick Ward wrote: ↑Mon Jun 14, 2021 9:25 pmThis has been fixed.asuser wrote: ↑Wed Mar 24, 2021 4:57 pm Missing ribbon marking for hero unit
Hello!
With the LUA script function it is possible to assign a hero to units. It works for most nations correctly. This is then visible on the unit plate of the corresponding unit with a small ribbon.
I'm currently working on a scenario for Vichy France. There it does not seem to work with hero assignment and the identification of the hero unit with the ribbon.
Vichy France troops are marked with "VF" in the editor. When looking in the main directory ... / Content / GUI / UnitPlates / Ribbons I noticed that there is no file with the ending "vf".
Could it be because of that and how can I help myself here?
See here, please, the missing sign at the hero unit plate (white/empty):
PC2_Ribbon_test.png
Pat
Thank you for the information. I tested it, unfortunately it still doesn't work. Can you show a test picture how it looks now, please?
Or will it work with the next patch around 9th of July?
Pat
............................
Pat a Pixel Pusher
............................
Pat a Pixel Pusher
............................
Re: Bug Reports
Sceanario Crete Ver 1.1.23: Mosquito IV has no air attack value. I though the plane was like the BF 110 or Beufighter, but better...
-
- Slitherine
- Posts: 1154
- Joined: Thu Sep 04, 2014 2:49 pm
- Location: A small island in the Outer Hebrides.
Re: Bug Reports
The IV was a bomber. It had no guns.
Pat
............................
Pat a Pixel Pusher
............................
Pat a Pixel Pusher
............................
-
- Master Sergeant - U-boat
- Posts: 505
- Joined: Sat Nov 20, 2010 6:06 pm
- Location: MICHIGAN,USA
THE BRITISH MOSSIE IN WII...
EVERYTHING YOU EVER WANTED TO KNOW ABOUT THE "WOODEN WONDER"
https://en.wikipedia.org/wiki/De_Havill ... ._164.-156
https://en.wikipedia.org/wiki/De_Havill ... ._164.-156